Electro Magnetic Flow Meter
(With RS485 O/P)
Make : EnthuTech
Brand: akvodrops
Model: AD-EMFM
Product Overview:
Electromagnetic flowmeters are designed to measure the volumetric flow rates of liquid (with and without solid contents) pulps, pastes and slurries in practically all industrial sectors. The only requirement is that the process product should have a defined minimum electrically conductivity.
The instrument is based on Faradays Law of electromagnetic induction. A magnetic field is generated by the instrument in the flow tube. The fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity. Corresponding electrical output is provided with respect to measuring flow range.
Salient Features:
o Electro Magnetic Flow typeo RS485 Modbus Output Provision
o Measurement is independent of density, viscosity,
temperature, and pressure.
o High accuracy is guaranteed according to the linear
measurement principle.
o Simple Installation and start-up
o Large backlit graphic display with intuitive operation.
o A variety of operating languages integrated as
standard.
o Full bore type
o Empty pipe, low & high flow, and excitation alarm
indication
o High degree of reliability and measuring stability.
o Maintenance Free
o Extremely quick Signal Ratio
o No obstruction to the flow
o Meter IP Rating: IP68
Specifications:
o Accuracy: ± 0.2%o Repeatability: ± 0.2% of Span
o Flow Rate: 0.3 to 10 m/s
o Medium Pressure: 10/16/25/40 (Kg/cm2)
o Electrode Material: SS316 Std/ Hastalloy C/ Titanium/
Tantalum/ Platinum
o Lining Material: PTFE/ Rubber/ Neoprene/ PFA/
HDPE/ Polyurethane/ CPVC
o Flow Tube Material: SS304 Std/ SS316
o Coil House Material: Carbon steel/ Stainless steel
o Power supply: 230VAC/ 24VDC/ Battery
o Communication Interface: RS485 Modbus
o Display: LCD Display
o Enclosure Material: Die Cast Aluminium
o Working Temperature -20°C to 60°C
o Working Humidity: 5 to 95% Non-condensing
o Available Sizes: DN25 to DN1000
Transmitter Technical Data
Display: 3 lines x 12-character alpha- numeric backlit LCD.
Displays rate of flow, total flow, alarms analog outputs and relay
annunciators.
Displays text prompts in programming mode.
Outputs: Pulse Output; 4-20 Ma output fully isolated.
High/Low alarms relay output RS 485
Transmitter Technical Data
All electromagnetic flow meters are delivered ready for operation.
Install the flow meter in the pipeline. Make the electrical
connection, that's it. Install directly into the process pipeline can be
installed in horizontal, vertical or slopped pipelines.
Note: For accurate flow measurement the flow detector must always
be full. Recommended installations requirements are 5 diameters of
straight pipe section upstream and 3 diameters downstream.
Certifications & Complainces:
o ISO 4064
o IS779:1994 (In Progress)
o ISO/IEC 17025:2017
o 100% of the products are calibrated and all calibration results can be provided on request.
Applications:
o Domestic & Industrial Water
o Raw & Ground Water
o Urban Sewage
o Industrial Waste Water
o Processed Neutral Pulp & Pulp Slurry
o Chemicals etc.
